Skip to Content


Get continuous 
Gypsum Profiling

See the true geometric cross-section of 
every board —  face, shoulder, and
taper — in real-time.



  • Live board profile on 15" touchscreen
  • mgOS for Gypsum built-in
  • Connects to your PLC for data logging and/or closed loop control expansion
  • 12 KPI's tracked in real-time
  • Colour-coded alerts e.g., when zones drift out of spec
  • Track board variation throughout each shift with run charts
Schedule a call with a Mate Gauge Engineer


Flexible Footprints

Choose from O-Frame or C-Frame Architectures

MGO Gauge

MGO - for narrow or limited footprints

MGO Gauge

MGO - for narrow or limited footprints

  • Record and manage thickness through 17 measurement zones (5 shoulder + 12 face)
  • ±0.0002" accuracy of continuous measurements across your board
  • Works on either wet or dry side, easily capable of handling dust, moisture, and heat
Schedule a call with a Mate Gauge Engineer

Scrap Reduction

2 - 5%

*Based on 200 boards/hr @ $0.40 - $0.60/board scrap cost


Key Benefits

Hands-Free

Operators use live, on-screen
data to adjust and improve
the line instead of sampling
with mics.

100% Coverage

Every board gets measured (not just random samples). 
No guessing between manual checks

Catch it Early

Stop a bad board before it enter the dryer. Adjust Slurry in 5-10 Minutes to  reduce unnecessary dryer time

Plug & Play

Connects to your PLC via
Ethernet with no rip and
replace of controls. Works
with Allen- Bradley, Siemens,

and Omron.

Consistent & Reliable

Standardized systems
removes measurement
inconsistency that can
result from different
operator techniques.

Installation Options

Wet side Installation

  • Fast Feedback for slurry adjustments
  • Catch problems before wasting dryer time
  • Measures wet board accurately
Schedule a call with a Mate Gauge Engineer


Payback

12-18 Months

*Based on 200 boards/hr @ $0.40 - $0.60/board scrap cost

Intelligence Built Into Every Line Unit

mgOS for Gypsum


  • Full cross-section in real-time
  • Colour-coded zones (ex. red = out of spec)
  • Taper depth, shoulder height, face thickness
  • Thickness over time for each zone
  • Spot drift before it becomes scrap
  • Export data for shift periods

Export data for shift periods

Key Features


Virtual micrometer = 17
measurement points


Set tolerances per paper 
type-recipe


Alarm triggers when zones go out of spec


Plc Integration for 
automation adjustments


Annual Savings

$180k - $350k

*Based on 200 boards/hr @ $0.40 - $0.60/board scrap cost

Prevent Dryer Waste

Running full loads of out-of-spec boards costs

between $0.40 to $0.60 per bad board

Limit Customer Rejects

Callbacks for thickness issues, failed
inspections at the job site, lost contracts,
and warranty claims are impacting your
bottom line.

Reduce Line Downtime

Pausing the line, pulling boards to hand-check
with micrometers, and adjusting blindly are
creating excess scrap and reducing efficiency.